7 Ways To Lower Your Swimming Pool Maintenance Costs – 2023 Guide

Source: unsplash.com

Owning a pool is great and all, but the maintenance costs can sometimes be overwhelming.

And if you are truly concerned about the rising costs of pool maintenance, then you’re at the right place. In this article, we will discuss the 7 ways to lower your swimming pool maintenance costs.

With all that said, let’s start.

1. Don’t Heat It Up Too Much

Source: unsplash.com

It’s safe to say that there are two types of people. We have those who use their pools in the winter, and those who don’t. And if you happened to love going for a swim in the colder months, then your energy bill will be significantly higher.

Every in-ground pool has a heater that runs on electricity. This heater is responsible for maintaining the temperature of the pool. Most households don’t use their pools in the colder months, while others run the heater to ensure a nice warm temperature whenever they go for a swim.

And if you want to lower your maintenance costs, then consider either shutting the heater off during the colder months or lower the temperature.

2. Keep the Filter Clean

Pool owners dread costly repairs. The whole point of having a pool is to clean it regularly to prevent such costly repairs. And the part that is responsible for this is the filter.

The filter unit runs 24/7. But it’s safe to say that things can get inside it which hinders its use. Thus, consider cleaning the filter on a daily basis. This way you’re not only making sure that it works efficiently, but it also prevents costly repairs.

Since the filter also uses power, a great energy-saving tip is to shut it down during the night. This way you’re not only preventing costly repairs but saving money on electricity.

3. Invest In A Pool Cover

Source: unsplash.com

Pool covers are highly convenient because they prevent stuff from getting inside them. Not only that, but there is a hidden benefit to using covers.

Namely, water can very easily evaporate from your swimming pool. Bear in mind that you’ve paid for this water and you’ve heated it. So it would be quite counterproductive for the water to evaporate.

The way water evaporates from your swimming pool is quite easy actually. Not only does it evaporate under immense heat, but also from wind.

Contrary to popular belief, wind only quickens the rate at which swimming pool water evaporates. Thus, you should think of investing in a pool cover.

A pool cover essentially covers the pool. It prevents the elements from getting to it and it also prevents debris from falling into it.

This makes pool covers quite convenient as it does multiple jobs at once. And if there is anything we know about pool maintenance is that every small thing can have a negative effect.

4. Invest In a Self-Cleaning System

The thing that every pool owner hates is having to clean their swimming pool. It might be a boring task, but it is something that everyone must do.

But we’re seeing a rise of so-called, smart swimming pools. What makes them smart is the fact that they’re equipped with their own self-cleaning system that essentially cleans after itself.

The way these systems work is quite simple. The system itself is located on the floor. And the system essentially cleans any debris or algae that might form through time.

This saves you not only the effort but also money. Since you’ll have to maintain it less and less, you will be saving money on maintenance.

For more information on self-cleaning systems, make sure to visit this website.

5. Ensure pH Levels Are Balanced

Source: unsplash.com

Everyone that owns a pool knows how important it is to balance pH levels. By this, we mean chlorine and stabilizer. Chlorine is a chemical that makes the pool safe for usage. The way you make sure that chlorine levels are balanced is by balancing the pH levels.

Not only that but balancing stabilizer levels is also important. Stabilizer makes sure that the chlorine is effective enough to do its job.

By making sure that these two chemicals are properly balanced, you are preventing the need of having to go out and purchase these chemicals just to balance the pH levels.

And if there is one thing we know is that these chemicals can cost a lot of money.

6. Get A New Sanitation System

We’ve gone a long way since the first sanitation system was invented. Ever since we’ve seen how popular salt generators can be for pool maintenance. Salt generators essentially produce chlorine on-site.

This means you don’t have to go out and buy the chemical just to balance the pH levels. But there are even better systems thanks to technological advancements.

Namely, these systems are ozone and UV ozone systems that are more effective than salt generators. The reason why this is the case is simply down to the fact that they require less supplemental chlorine than salt-based systems.

The less they require chlorine the lower the maintenance costs. While chlorine is vital for the pool, having to swim in less in it will be better for you.

So consider getting yourself a new sanitation system.

7. Upgrade Heating

Source: unsplash.com

We talked about heating and how you can lower costs, but if you’re still going to do it then might as well get a high-efficiency heater.

High-efficiency heaters save, on average, $350 for every $1,000 you spend on heating. This makes them nearly 35% more energy efficient than most traditional heaters.

The greatest feature of high-efficiency heaters is that they are 95% more effective throughout the year. They are still gas-powered but you can also find a solar-based heater with hot water panels.

Conclusion

There are dozens of ways how you can lower pool maintenance costs. And these 7 ways will help do just that. So if you’re thinking of becoming more energy-efficient and lower maintenance costs, then consider some of the ways we just mentioned. As always, you can go out of your way and invest more money into an energy-efficient swimming pool, as this seems to be the newest trend in swimming pool energy-efficiency.